5333D 2-wire programmable transmitter
Price on request
5333D 2-wire programmable transmitter
- Product description
- Extra information
- Downloads
-
- RTD or Ohm input
- High measurement accuracy
- 3-wire connection
- Programmable sensor error value
- For DIN form B sensor head mounting
Application
- Linearized temperature measurement with Pt100...Pt1000 or Ni100...Ni1000 sensor.
- Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors.
Technical characteristics
- Within a few seconds the user can program PR5333A to measure temperatures within all RTD ranges defined by the norms.
- The RTD and resistance inputs have cable compensation for 3-wire connection.
Mounting / installation
- For DIN form B sensor head or DIN rail mounting with the PR fitting type 8421.
-
Technical Specifications
Environmental Conditions
Operating temperature
-40°C to +85°C
Calibration temperature
20...28°C
Relative humidity
< 95% RH (non-cond.)
Protection degree (encl./terminal)
IP68 / IP00
Mechanical specifications
Dimensions
Ø 44 x 20.2 mm
Weight approx.
50 g
Wire size
1 x 1.5 mm2 stranded wire
Screw terminal torque
0.4 Nm
Vibration
IEC 60068-2-6
2...25 Hz
±1.6 mm
25...100 Hz
±4 g
Common specifications
Supply
Supply voltage
8.0...35 VDC
Internal power dissipation
25 mW…0.8 W
Response time
Response time (programmable)
0.33...60 s
Voltage drop
8.0 VDC
Warm-up time
5 min.
Programming
Loop Link
Signal / noise ratio
Min. 60 dB
Accuracy
Better than 0.1% of sel. range
Signal dynamics, input
19 bit
Signal dynamics, output
16 bit
Effect of supply voltage change
< 0.005% of span / VDC
EMC immunity influence
< ±0.5% of span
Input specifications
Common input specifications
Max. offset
50% of selected max. value
RTD input
RTD type
Pt100, Ni100, lin. R
Cable resistance per wire
10 Ω (max.)
Sensor current
> 0.2 mA, < 0.4 mA
Effect of sensor cable resistance (3-wire)
< 0.002 Ω / Ω
Sensor error detection
Yes
Linear resistance input
Linear resistance min....max.
0 Ω...10000 Ω
Output specifications
Current output
Signal range
4…20 mA
Min. signal range
16 mA
Load (@ current output)
≤ (Vsupply - 8) / 0.023 [Ω]
Load stability
≤ 0.01% of span / 100 Ω
Sensor error indication
Programmable 3.5…23 mA
NAMUR NE43 Upscale/Downscale
23 mA / 3.5 mA
Common output specifications
Updating time
135 ms
of span
= of the presently selected range
Observed authority requirements
EMC
2014/30/EU
EAC
TR-CU 020/2011
Approvals
ATEX 2014/34/EU
KEMA 10ATEX0003 X
IECEx
DEK 13.0036X
FM
FM17US0013X CSA
1125003 INMETRO
DEKRA 16.0014 X
CCOE
P337392/3
EAC Ex TR-CU 012/2011
RU C-DK.GB08.V.00410 DNV-GL Marine
Stand. f. Certific. No. 2.4
-
Documents:
File name Upload Date Size PR Electronics 5333D Datasheet 2019.3.11 0.5 MB PR Electronics 5333D Manual 2018.3.28 1.43 MB