ADROIT6000 Pressure Sensor
Price on request
When you are looking for a small pressure sensor with high performance, then The ADROIT6000 is what you are looking for. The ADROIT6000 combines Digital temperature compensation, Analogue signal outputs, Fast response times, High quality mechanical design in a small package for easy installation.
- Product description
- Extra information
- Video
- Downloads
-
Reliability is of the utmost importance when it comes to trusting pressure sensors. With Druck’s ADROIT6000, you can have nothing but confidence that this will work for many years to come.
With the ADROIT6000, you get nothing but great, accurate results, and it has never been so easy to check that it is operating accurately. The digital compensation gives this pressure sensor better performance, especially over temperature. Also, its small size means that this will be easy to install in hard to access applications and with down wire calibrations using a phone App there is no need to access for maintenance. Furthermore, there are standard analogue outputs for ease of integration into existing systems and equipment.
ADROIT6000 has a collection of features which are unlike any pressure sensor before. When you go to the download tab, you can download and read an article to learn how these features combine to enhance asset performance. -
Ordering Information (1) Select model number Product Series ADROIT6 ADROIT6200 Diameter and Material 2 19mm Stainless Steel Electrical Connector 1 Polyurethane Cable (metal crimp) 2 Raychem Cable (metal crimp) 6 MIL-C-26482 Bayonet 7 DIN 43650 Form A Demountable (Mating connector supplied) Note 1 D Micro DIN (9.4 mm Pitch) Note 2 G M12 x 1 4-pin Note 1 Electronics Option 2 4 to 20 mA 2-wire 4 0 to 5 V 3-wire 5 Configurable Voltage 3-wire Compensated Temperature Range TB -20 to +80 °C TD -40 to +125 °C Note 3 Accuracy A2 Improved A3 Premium. Note 4 Calibration CD Total Precision and Zero and Span data Hazardous Area Approval (Note 6) H0 None Pressure Connector PA G1/4 Female PB G1/4 Male Flat PC G1/4 Male 60° Internal Cone (Note 5) PE 1/4 NPT Female PF 1/4 NPT Male PG 1/8 NPT Male (Note 5) PJ M14x1.5 60° Internal Cone (Note 5) PK M12x1 Internal Cone (Note 5) P22 7/16-20 UNF flat end 74° (Note 5) PS 1/4 Swagelok Bulkhead (Note 5, 8) PT G1/4 Male Flat Long (Note 5) P33 7/16-20 UNF Female W/L RC G1/4 Male Flar-Cross Bore (Note 6) RF 1/4 VCR male (Note 8) RQ NW16 Flange (Note 7, 8) P14 7/16-20 UNF Long 37° Flare Tip (Note 8) ADROIT6 2 6 2 - TB - A2 - CD - H0 - PA Typical Model Number
Ordering NotesNote 1: Mating connector not supplied. (see Accessories, section 3)
Note 2: Mating connector supplied. (see Accessories, section 3)
Note 3: Choose from electrical connector options 2, 6 or G and a minimum pressure range of 2 bar to select TD compensated temperature range.
Note 4: Premium Accuracy is not available if TD compensated temperature range is selected
Note 5: This connection is only available on pressure ranges up to ≤350 bar.
Note 6: This connection is only available on pressure ranges between ≥10 bar and ≤350 bar.
Note 7: This connection is only available on pressure ranges up to <10 bar.
Note 8: This connection is not available with differential pressure ranges.
2) State pressure range and units (e.g., 0 to 10 bar, -5 to +5 bar)
Pressure unit options are:
Symbol
Description
bar
bar
mbar
millibar
psi
pounds/sq. inch
Pa
Pascal
hPa
hectoPascal
kPa
kiloPascal
MPa
MegaPascal
mmH2O
mm water
cmH2O
cm water
mH2O
metres water
inH2O
inches water
ftH2O
feet water
mmHg
mm mercury
inHg
inches mercury
kgf/cm2
kg force/sq. cm
atm
atmosphere
Torr
torr
3) State pressure reference (e.g., gauge)
Reference options are:- gauge
- absolute
- barometric
- sealed gauge
- wet/dry differential
- wet/wet differential
4) Electrical Connector options 1 and 2: State cable lengths and units: integer values only in ft or m.- Minimum length 1 m (3 ft) cable
- Maximum cable length 3 m (9 ft)
5) Electronics option 5" State output at minimum and maximum pressure: e.g. output 0.5 to 4.5 V
State voltage output at minimum and maximum pressure(e.g., output –1 to 9 V)
Accessories (to be ordered as separate line items)
1. ADROIT6000 Interface box Part number : ADROIT-Interface
The interface is used with a Windows-based PC or an Android device (laptop, tablet or phone). It enables the user to make small adjustment to the zero and span settings of the sensor for calibration purposes. It is supplied with a USB lead to USB-C (Android device) or USB-A (Laptop)
2. Test leads
Set of 2off 4mm leads and crocodile clips for connection to the ADROIT6200 sensor are available. Part Number: 209-359 Part Description: UPSIII Test lead set. 2 sets are required for a calibration.
3. Mating connectorsFor MIL-C-26482 Bayonet- For M12 x 1 4-Pin
- For Micro DIN (9.4 mm Pitch)
4. Cable Assemblies
Part Number 163-009
Part Number 149M7393-1
Part Number 192-257-01 (one supplied with each sensor)A made up electrical connector with a length of cable terminated in solder tinned wires
4. Cable AssembliesA made up electrical connector with a length of cable terminated in solder tinned wiresMinimum length 1m (3ft) Maximum length 200m (600ft) Example: UNIKCABLE-6-2 5m
(1) Select part number Main Product UNIKCABLE Cable Assembly Electrical Connector 6 MIL-C-26482 Bayonet 7 DIN 43650 D Micro DIN (9.4 mm Pitch) G M12 x 1 4-pin Cable 1 Polyurethane Cable 2 Raychem Cable ADROIT6 6 2 (Example Part Number) (2) State Cable length and units (integer value only)
Minimum length 1m (3ft)
Maximum length 200m (600ft)
Example: UNIKCABLE-6-2 5m -
Documents:
Filename Upload date Size ADROIT6000 Datasheet 2020.11.11 0.5 MB ADROIT6000 Whitepaper 2020.11.11 0.4 MB